Laboratory Disposable Plastic 15/50 Ml with Flat-Top/Plug Seal Screw Caps Conical Bottom Centrifuge Tubes

• Disposable: Disposable
• Certification: CE, ISO
• Material: Plastic
• Bottle Top: Screw Top
• Capacity: 15ml 50ml Centrifuge Tubes
• Name: Centrifuge Tubes
• Model NO.: 10-9151/10-9152/10-9501/10-9502/10-9815/10-9850
• Made of: PP Centrifuge Tubes
• Sterile: Sterile
• Dnase and Rnase Free: Dnase and Rnase Free
• Caps: Plug-Seal Screw Caps and Flat-Top Caps
• Autoclavable: Autoclavable
• Writing Area and Black Graduations: Writing Area and Graduations
• Bottom: Conical
• Transport Package: 500 /Case
• Specification: 15ml 50ml centrifuge tubes
• Trademark: Biologix
• Origin: China
• Production Capacity: 1000000 Cases/Month

Product Description

Laboratory Disposable Plastic 15/50 ML Flat-Top/Plug Seal Screw Caps Conical Bottom Centrifuge Tubes

Feature:

· 15/50 ml Centrifuge Tubes, With Flat-Top/Plug Seal Screw Caps Conical Bottom

· Tubes Material: PP, strong and sturdy

· Two volumes: 15 ml and 50 ml to meet different research needs

· Two type of caps: Flat Cpas and plug-seal caps

· Flat-top caps, material: PE

· Plug-seal screw on caps, material: PP

· Gamma radiation sterilization, pyrogen-free
· No heavy metals, large white writing area is easy for recording experimental data

· The black scale line can clearly observe the sample condition, which is conducive to the conduct of the experiment
· Double thread design reduces the problem of misaligned teeth during the experiment, seal the cap and the cap is easy to open and close
· Sterile and non-sterile tubes are available

· Available in rack packaging (sterile) or bulk packaging (sterile and non-sterile)
· RNase and DNase free

·The tube is suitable for operation in temperatures from -20°C to 121°C (except flat top cover)



Ordering Information

Cat #	Volume(ml)	Caps	Package	Unit	Total
10-9151	15	Flat Top	Rack	50 Sets/Rack, 10 Racks/Case	500/Case
10-9152	15	Flat Top	Bulk	25 Sets/Pack, 20 Packs/Case	500/Case
10-9501	50	Flat Top	Rack	25 Sets/Rack, 20 Racks/Case	500/Case
10-9502	50	Flat Top	Bulk	25 Sets/Pack, 20 Packs/Case	500/Case
10-9815	15	Flat Top	Bulk	500 Sets/Case	500/Case
10-9850	50	Flat Top	Bulk	500 Sets/Case	500/Case
10-0151	15	Plug Seal	Rack	50 Sets/Rack, 10 Racks/Case	500/Case
10-0152	15	Plug Seal	Bulk	25 Sets/Pack, 20 Packs/Case	500/Case
10-0501	50	Plug Seal	Rack	25 Sets/Pack, 20 Packs/Case	500/Case
10-0502	50	Plug Seal	Bulk	25 Sets/Pack, 20 Packs/Case	500/Case
10-0815	15	Plug Seal	Bulk	500 Sets/Case	500/Case
10-0850	50	Plug Seal	Bulk	500 Sets/Case	500/Case

1. What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
2. What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
3. What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.