125 Ml Erlenmeyer Shake Flask, Vent Cap (Green) , 0.22 μ M PTFE Membrane Filter, Flat Bottom 1PCS/Pk, 24 Bags/CTN, Sterile

• After-sales Service: 5 Years
• Warranty: 5 Years
• Certification: CE, ISO
• Model NO.: 07-
• Material: PS
• Cap Type: Filter
• Culture Area: 175cm2
• Working Volume: 125ml
• Surface Treatment: Yes
• Sterile: Yes
• Unit: 24 PCS/Case
• Trademark: BIOLOGIX
• Origin: Changzhou City, Jiangsu Province, China
• HS Code: 3923300000

Product Description

 

 

Erlenmeyer Flasks

Features:

1 The body is made of medical polycarbonate (PC), which meets the requirements of ISO10993 USP (661).

2 The advantages of PC are high transparency, strong impact resistance, oxidation resistance, and high temperature resistance up to 121 ° C.

3 Clear and accurate scale on the outer wall is convenient to read the volume.

4 Optional sealed cap or vent cap with a 0.22μm PTFE membrane which is air-permeable and allows gas exchange without contamination.

5 Automatically produced in self-owned GMP workshop with good consistency, stable supply, and cost control.

6 DNase/RNase-free, pyrogen-free, and precipitation-free.

7 Individual packaged and radiation sterilized, highest Sterility Assurance Level (SAL) of 10^-6

8 Suitable for small-scale development, cell culture scale-up and other training stages.

Cat #	Description	Qty
07-0125	125ml PC Erlenmeyer Culture Flasks with vent cap, individual package	24 Pcs/Case
07-1125	125ml PC Erlenmeyer Culture Flasks with sealed cap, individual package	24 Pcs/Case
07-0250	250ml PC Erlenmeyer Culture Flasks with vent cap, individual package	12 Pcs/Case
07-1250	250ml PCErlenmeyer Culture Flasks with sealed cap, individual package	12 Pcs/Case
07-0500	500ml PC Erlenmeyer Culture Flasks with vent cap, individual package	12 Pcs/Case
07-1500	500ml PC Erlenmeyer Culture Flasks with sealed cap, individual package	12 Pcs/Case
07-0110	1L PC Erlenmeyer Culture Flasks with vent cap, individual package	12 Pcs/Case
07-1110	1L PC Erlenmeyer Culture Flasks with sealed cap, individual package	12 Pcs/Case
07-0220	2L PC Erlenmeyer Culture Flasks with vent cap, individual package	6 Pcs/Case
07-1220	2L PC Erlenmeyer Culture Flasks with sealed cap, individual package	6 Pcs/Case
07-0330	3L PC Erlenmeyer Culture Flasks with vent cap, individual package	4 Pcs/Case
07-1330	3L PC Erlenmeyer Culture Flasks with sealed cap, individual package	4 Pcs/Case
07-0550	5L PC Erlenmeyer Culture Flasks with vent cap, individual package	4 Pcs/Case
07-1550	5L PC Erlenmeyer Culture Flasks with sealed cap, individual package	4 Pcs/Case

1. What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.  What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.  What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.