Laboratory High Resolution (1024*600) and High Sensitivity Touch Screen pH/Conductivity Meter

• Type: General Lab Supplies
• Material: Plastic
• Quality Guarantee Period: Two Years
• Model NO.: 01-MP811X/01-MP813X
• Group: Adult
• Logo Printing: With Logo Printing
• Brand: Biologix
• pH Auto Calibration: 1, 2, 3 Point
• pH Buffer: Europe & USA, Nist, China Standards
• pH Temp.Compensation: (0~100)ºC, Auto or Manual
• Data storage: 1000 Sets
• Output: USB
• Power: 12V/1A
• Transport Package: Case
• Specification: 1/Case
• Trademark: Biologix
• Origin: China
• Production Capacity: 5000000piece Per Year

Product Description

Laboratory High Resolution (1024*600) and High Sensitivity Touch Screen pH/Conductivity Meter

Feature:
· 7-inch colored capacitive touch screen with high resolution(1024*600) and high sensitivity

· Built-in microprocessor chip has Intelligent functions such as automatic calibration, ATC, data storage, clock display, USB output, function settings, wireless printing, and self-diagnosis information, etc.

· Auto recognition of 25 buffers with three kinds of options: Europe & USA NIST and China

· Auto recognition of 8 conductivity standard solution with 2 kinds of options: Europe & USA, and China

· It supports PC connection. Wireless bluetooth printing and real-time data transfer to mobile phone are optional

· Smart electrode status display to ensure accurate use

· Can store 1000 sets of test data, which can be saved and transferred



Ordering Information

Technical Parameter	Cat#	01-MP811X	01-MP813X
PH	Measuring range	(-2.00 ~ 20.00)pH	(-1.999 ~ 19.999)pH
	Resolution	0.1/0.01 pH	0.1/0.01/0.001 pH
	Accuracy	±0.02pH	Electrode: ±0.002 pH, Meter: ±0.01 pH
	Auto calibration	1, 2, 3 point
	Buffer	Europe & USA, NIST, China standards
	Input current	≤1×10-12 A
	Input impedance	≥3×1012Ω
	Stability	±0.01 pH/3h	±0.002 pH/3h
	Temp.compensation	(0~100)ºC, auto or manual
mV	Measuring range	-1999.9mV ~ 0 ~ 1999.9mV
	Resolution	1 mV	0.1 mV
	Accuracy	±0.1% FS	±0.03% FS
Cond.	Measuring range	/	Conductivity: (0.00~20.00)μS/cm, (20.0~200.0)μS/cm (200~2000)μS/cm, (2.00~20.00)mS/cm (20.0~200.0)mS/cm, (200~2000)mS/cm(K=10) TDS:(0~100)g/L Salinity:(0~100)ppt Resistivity:(0~100)MΩ·cm
	Resolution	/	0.01/0.1/1 μS/cm; 0.01/0.1 mS/cm
	Accuracy	/	Electrode: ±0.5% FS, Meter: 0.8% FS
	Temp.compensationrange	/	(0~100)°C,auto
	Electrode constant	/	0.1/0.5/1/5/10/50/100 cm-1
Temp.	Range	(-10 ~ 110)ºC
	Resolution	0.1ºC
	Accuracy	±0.5ºC
Other	Data Stroage	1000 sets
	Output	USB
	Power	12V/1A
	Ambient Temp.	15 ~ 30 ºC
	Ambient Humidity	≤85%
	Dimensions/N.W.	215×170×37mm/600g
	IP grade	IP54
	Standard Accessaries	pH electrode, Cond. Temperature probe, pH buffer solution (powder-like). Power adapter, Manual, electrode (K=1, matches 01-MP813X)

                                                                                                                                                                                       * X stands for a different plug: 1-US Plug; 4-EURO Plug; 5-UK Plug

1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.