96-Well Deep Well Plates Round /Square Well Magnet Set and 8-Strip Magnet Sets

• Disposable: Disposable
• Certification: CE, ISO, FDA
• Material: PP
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 02-2010/02-1016/02-1022/
• Type: 0.5ml 1.0ml 1.6ml 2.2ml 10ml Deep Well Plates
• Made of: PP Deep Well Plates
• Sterile: Sterile or Non
• Dnase and Rnase Free: Dnase and Rnase Free
• Bottom: U or V
• Autoclavable: Autoclavable
• Well: Round or Square
• Volume: 0.5ml 1.0ml 1.6ml 2.2ml 10ml
• Characteristic: Conform to Sbs Standards
• Transport Package: 24 Pieces/Pack, 96 Pieces/Case
• Specification: 0.5ml 1.0ml 1.6ml 2.2ml 10ml Deep Well Plates
• Trademark: Biologix
• Origin: China
• Production Capacity: 1000000 Cases/Month
• Package Size: 1.00cm * 1.00cm * 1.00cm
• Package Gross Weight: 1.000kg

Product Description

Disposable Laboratory 96-Well Deep Well Plates Round /Square Well Magnet Set and 8-Strip Magnet Sets

 

 96-Well Deep Well Plates Round /Square Well Magnet Set and 8-Strip Magnet Sets

Features:

1.  Made of high quality medical grade polypropylene; autoclavable; chemically resistant to alcohols and mild organic solvents.
2. Sterilization, individual wrap and lid optional.
3. 10ml, 2.2ml, 1.6ml, 1.0ml, 0.5ml, square and round wells, U bottom and V bottom available.
4. Can be sealed with sealing film or silicone covers.
5. Conform with SBS standards; compatible with automated nucleic acid extraction equipment.
6. 96-well magnet set and 8-strip magnet set.
7. DNase & RNase free,pyrogen free.

 

Ordering Information

Cat#	Well	Volume	Bottom	Sterile	Cap	Unit
02-9010	24 wells, square	10ml	V	No	No	10/Pack, 50 / Case
02-8005	96 wells, square	0.5ml	V	No	No	10 /Pack, 100 / Case
02-2010-50	96 wells, round	1.0ml	U	No	No	10/Pack, 50 / Case
02-1016	96 wells, square	1.6ml	U	No	No	24 /Pack, 96 / Case
02-1022	96 wells, square	2.2ml	U	No	No	24 /Pack, 96 / Case
02-6022	96 wells, square	2.2ml	U (Profile Concave)	No	No	24 /Pack, 96 / Case
02-7022	96 wells, square	2.2ml	V	No	No	10 /Pack, 50 / Case
02-0096	96-well magnet set, non-sterile					2 /Pack, 50 / Case
02-1096	96 square silicone sealing mats, for 96 square deep well plates, non-sterile					10 /Pack, 50 / Case
02-0008	8-strip magnet set					2 /Pack, 100 / Case
02-1196	96 square silicone sealing mats,can be punctured,  for 96 square deep well plates, non-sterile					10 /Pack, 50 / Case
02-2196	96 round silicone sealing mats, can be punctured, for 1.0 ml plates, non-sterile					10 /Pack, 50 / Case
02-2296	96 round silicone sealing mats, can be punctured, for 2.0 ml plates, non-sterile					10 /Pack, 50 / Case
02-3024	24 square silicone sealing mats,for 24 square deep well plates 10ml, non-sterile					10 /Pack, 50 / Case
02-000C	Cap fits for universal deep well plate,PS, No cap					10 /Bag,20 / Pack, 50 / Case
02-000CS	Cap fits for universal deep well plate,PS, With cap					10 /Bag,20 / Pack, 50 / Case

 

 

1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics? To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.