0.5/1.5/2.0ml Rnase & Dnase Free Microcentrifuge Tubes

• Certification: CE, ISO, FDA
• Material: PP
• Color: Clear, Red, Yellow, Blue
• Model NO.: 80-0500 80-0015 80-1500 80-1501 80-1502 80-1503 8
• Volume: 0.5/1.5/2.0ml
• Sterile: No
• Working Temperature: Stable From -20°c to 121°c
• Transport Package: 5000/Case
• Specification: 500/Bag, 10 Bags/Case
• Trademark: BIOLOGIX
• Origin: Changzhou City, Jiangsu Province, China
• Production Capacity: 200 Cases/Week

Product Description

0.5/1.5/2.0ml  RNase & DNase free  Microcentrifuge Tubes 


Features:
1) Designed to withstand the stresses of high speed centrifugation of 23, 000 RCF in a fully supported rotor;
2) Made from high quality medical grade polypropylene;
3) Transparent wall permits easy viewing of tube contents;
4) Attached flat cap for labeling and with writing area on the side of the tube;
5) RNase & DNase free;
6) 4 attractive colors provide preference and identification of samples;
7) Working temperature: Stable from -20° C to 121° C;
8) Accurate graduation marks: 0.1ml, 0.5ml, 1.0ml, 1.5ml;
9) Thumb-friendly beveled lip for easy one-hand operation;
10) Conical bottom for easy sample collection

Cat #	Volume	Color	Sterile	Unit
80-0500	0.5ml	Clear	No	500 Pieces/Pack, 10 Packs/Case
80-0015	1.5ml	Clear	No	500 Pieces/Pack, 10 Packs/Case
80-1500	1.5ml	Clear	No	500 Pieces/Pack, 10 Packs/Case
80-0020	2.0ml	Clear	No	500 Pieces/Pack, 10 Packs/Case
80-1501*	1.5ml	Red	No	500 Pieces/Pack, 10 Packs/Case
80-1502*	1.5ml	Yellow	No	500 Pieces/Pack, 10 Packs/Case
80-1503*	1.5ml	Blue	No	500 Pieces/Pack, 10 Packs/Case

1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.