1. Bio-safe rotor prevents sample overflow and ensures samples do not
leak during the centrifuging process
2.High strength aluminum alloy rotor is autoclavable and highly durable
3.Four different rotors are available, assembled with 1.5ml/2ml x 24
High-speed Refrigerated Micro Centrifuge
Features
1.Bio-safe rotor prevents sample overflow and ensures samples do not
leak during the centrifuging process
2. High strength aluminum alloy rotor is autoclavable and highly durable
3. Four different rotors are available, assembled with 1.5ml/2ml x 24
Features
4. Centrifuge chamber door with automatic adsorption
door lock design,can be closed with a single finger.
5. Precooling,the compressor will automatically start cooling
as long as the set temperature is lower than the
ambient temperature.
6. Sound indicator to prompt that the upper cover is closed to
maintain the temperature inside the chamber, after centrifugation.
7. Advanced R290 flurine free refrigerant ,low caron
and environmental protection.
8. Maximum rotation speed can be achieved even at 4ºC .
9. Up to 9 program storage capacity according to
experimental needs.
10. Biosafety rotor,three-layer seal for biosafety.
11. High-strength aluminum alloy,three layered
biosafety to withstand numerous high
temperature and high pressure sterilizations.
12. Five rotors with 0.2ml,0.5ml,1.5ml,2ml and 5ml
centrifuge tubes/PCR tubes capacity.
13. An external condensation tank prevents
condensate within the centrifuge chamber.
14. Other functions: Rotation speed/RCF switchover, inching
operation,running process indicator, sound alert.
Acceleration/deceleration in 9 steps, program storage capacity. 1.What are the main factors that influence the maximum centrifugal acceleration force? Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins. The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower. Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample. 2.What are autoclaving guidelines of plastics? To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products. 3.What are Biologix's Commitments to Quality? We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.
Audited Supplier 
){kind=link}