15ml Sterile Centrifuge Tubes Conical Rnase & Dnase Free Bulk And Racked Package With Flat and Plug Seal Caps Tube

• Certification: CE, ISO, FDA
• Material: PP
• Capacity: 15mL
• Working Temperature: From -20 Degree to 121 Degree
• Sterile: Gamma Radiation
• Caps: Flat Top Plug Seal
• Model NO.: 10-9151 10-915210-981510-015110-015210-0815
• Transport Package: 500/Case
• Specification: Bulk Or Racked Package
• Trademark: BIOLOGIX
• Origin: Changzhou, Jiangsu, China
• HS Code: 3917220000
• Production Capacity: 200cases/Month

Product Description

 15ml Sterile Centrifuge Tubes Conical Rnase & Dnase Free Bulk and Racked Package With Flat And Plug Seal Caps Tube

I. APPLICATIONS
1. Cell centrifugation
2. Molecular biology
3. Sample storage
4. Centrifugation of precipitates

II. FEATURES
1. Materials: Strong, medical-grade polypropylene
2. Chemically resistant to alcohols and mild organic solvents
3. Transparent wall permits easy viewing of tube contents
4. Working temperature: stable from -20ºC to 121ºC
5. Tested to withstand centrifugation of 8,400 RCF in a fully supported rotor

III. TUBE DESIGN
1. Conical bottom design fits most standard floor model and table-top centrifuges
2. Graduation with white ink, in 1ml increments
3. Clearly visible with either clear or turbid samples
4. Solvent resistant printing will not rub off during routine laboratory procedures
5. White writing area facilitates sample identification

IV. CAP DESIGN
1. Flat-top screw on cap a) Biologically inert, high density polyethylene provides a chemically resistant surface b) Double threaded design to reduce cross-threading, easily opened and closed c) Flat top facilitates top writing areas for sample identification
2. Plug-seal screw on cap a) Biologically inert, high density polypropylene provides a chemically resistant surface. b) Double threaded design to reduce cross-threading, easily opened and closed.

V. PACKAGING
1. Foam racked package (Sterile) a) Foam racks offer the convenience of oriented product presentation b) Samples can be viewed without removing tubes from rack
2. Bulk packed package (Sterile) a) Transparent polyethylene bag
3. Bulk packed package (Non-sterile) a) Transparent polyethylene bag

VI. DESCRIPTIONItem

Cat #	Volume	Caps	Sterile	Package	Unit
10-9151	15ml	Flat Top	Yes	Rack	50 Sets/Rack, 10 Racks/Case
10-9152	15ml	Flat Top	Yes	Bulk	25 Sets/Pack, 20 Packs/Case
CTW00150	15ml	Flat Top	Yes	Bulk	50 Sets/Pack, 10 Packs/Case
10-9815	15ml	Flat Top	No	Bulk	500 Sets/Case
10-0151	15ml	Plug Seal	Yes	Rack	50 Sets/Rack, 10 Racks/Case
10-0152	15ml	Plug Seal	Yes	Bulk	25 Sets/Pack, 20 Packs/Case
10-0815	15ml	Plug Seal	No	Bulk	500 Sets/Case

VII. STERILITY
1. Products are Gamma Radiation Sterilized according to ISO13485 standard.
2. For each lot, sterilization records are recorded and signed off by qualified personnel for product release

1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.