Laboratory Disposable Pes Ca Pore Size 0.22/0.45μ M Sterile Syringe Filters with Luer Lock

• Outer Diameter: 33mm
• Pore Size: 0.45um
• Media Material: PES
• Model NO.: 08-PES3345S/08-PES2522R
• Pore Sizes: 0.22/0.45μm
• Material: Pes/Ca
• Diameter: 13/25/30/33mm
• Luer Lock: Yes
• Package: Individually Packed
• Unit: 100 PCS/Pack, 8 Packs/Case, Case of 800
• Transport Package: 4 Packs/Case
• Specification: 100 Pcs/Pack
• Trademark: BIOLOGIX
• Origin: Changzhou City, Jiangsu Province, China

Product Description

Laboratory Disposable PES CA Pore Size 0.22/0.45μm Sterile Syringe Filters With Luer Lock

Feature:

· Sterilization by filtration is a safe and convenient method to remove microorganism from biological liquids, while minimizing the effects on ingredients 

· Various available diameters (13mm, 25mm, 30mm): right size for the right volume or particulate load

· Available with PES membrane: provides more than 98.5% percent protein recovery 

· Pre sterilized: ready to use for sterile filtration and clarification of biological fluids. 

· Non-pyrogenic, low-extractable and surfactant-free ensures purity of filtrate 

· Extreme-low Protein Binding more than l.5% (PES) 

· Excellent throughput, for faster filtration and more process volume 

 

Applications

· Sterile filtration and clarification of biological fluids

· Tissue culture media preparation 

· Protein and enzyme filtration 

· Hybridization buffers 

· Other aqueous solution 

Ordering Information

Cat #	Pore size(μm)	Description	Unit
08-PES1322R	0.22	Syringe filters.Membrane:PES, diameter:13mm.Female luer lock +male luer slip.Extreme-low protein binding.Individually packed	100/Pack, 8 Packs/Case
08-PES2522R	0.22	Syringe filters.Membrane:PES, diameter:25mm.Female luer lock +male luer slip.Extreme-low protein binding.Individually packed	100/Pack, 4 Packs/Case
08-PES3022R	0.22	Syringe filters.Membrane:PES, diameter:30mm.Female luer lock +male luer slip.Extreme-low protein binding.Individually packed	100/Pack, 4 Packs/Case
08-PES3322S	0.22	Syringe filters.Membrane:PES, diameter:33mm.Double luer lock Extreme-low protein binding.Individually packed	100/Pack, 4 Packs/Case
08-PES3345S	0.45	Syringe filters.Membrane:PES, diameter:33mm.Double luer lock Extreme-low protein binding.Individually packed	100/Pack, 4 Packs/Case
08-PES3322M	0.22	Syringe filters.Membrane:PES, diameter:33mm.Female luer lock +male luer slip.High pressure resistance.Individually packed	100/Pack, 4 Packs/Case
08-PES3345M	0.45	Syringe filters.Membrane:PES, diameter:33mm.Female luer lock +male luer slip.High pressure resistance.Individually packed	100/Pack, 4 Packs/Case
08-CA3022R	0.22	Syringe filters.Membrane:CA, diameter:30mm.Female luer lock +male luer slip.High biocompatibility.Individually packed	100/Pack, 4 Packs/Case
08-CA3045R	0.45	Syringe filters.Membrane:CA, diameter:30mm.Female luer lock +male luer slip.High biocompatibility.Individually packed	100/Pack, 4 Packs/Case

 

1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.