Laboratory Single-Channel/ 12-Channel 25/50/55/100ml PP PS PVC Solution Basins
Feature:
· A variety materials of solution basins are available, including PVC, polystyrene, and polypropylene
· PVC basins have high transparent and allow for easy viewing of contents
· PP basins are chemically resistant and can withstand alcohols and mild organic solvents
· PS one-channel basins are available in 25ml, 55ml, and 100ml options, with V-shaped bottom designs in the smaller models
· PVC single channel basin has a capacity of 55 ml and a V-shaped bottom
· PP 12 channel basin is double-sided: autoclavable, 12 channel side has a capacity of 5 ml per channel; the other side (single channel) has a capacity of 50 ml
· PP 12 channel basin is available in a variety of colors
· PS basins are individually packaged (sterile); PVC and PP basins are bulk packaged (non-sterile)
![Laboratory Single-Channel/ 12-Channel 25/50/55/100ml PP PS PVC Solution Basins](//www.micstatic.com/athena/img/transparent.png)
Ordering Information
Cat # |
Volume |
Material & Channel |
Color |
Package |
Unit |
25-1025 |
25ml |
PS, One channel |
White |
Individually Package |
1 Pcs/Bag, 100 Pcs/Case |
25-1202 |
50ml |
PP, 12channel |
Assorted Colors |
Bulk |
25 Pcs/Bag, 100 Pcs/Case |
25-0052 |
55ml |
PVC, One channel |
Clear |
Bulk |
100 Pcs/Bag, 800 Pcs/Case |
25-0051 |
55ml |
PS, One channel |
White |
Individually Package |
1 Pcs/Bag, 100 Pcss/Case |
25-1100 |
100ml |
PS, One channel |
White |
Individually Package |
1 Pcs/Bag, 50 Pcs/Case |
1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.