• Densest Foam, Densest Sponge, and Degreasing Fiber Drosophila Closures
  • Densest Foam, Densest Sponge, and Degreasing Fiber Drosophila Closures
  • Densest Foam, Densest Sponge, and Degreasing Fiber Drosophila Closures
  • Densest Foam, Densest Sponge, and Degreasing Fiber Drosophila Closures
  • Densest Foam, Densest Sponge, and Degreasing Fiber Drosophila Closures
  • Densest Foam, Densest Sponge, and Degreasing Fiber Drosophila Closures

Densest Foam, Densest Sponge, and Degreasing Fiber Drosophila Closures

Disposable: Non-Disposable
Certification: CE, ISO, FDA
Power Source: Drosophila Research
Material: Densest Foam/Densest Sponge/Degreasing Fiber
Product Description: Fit for Drosophila Vials and Bottles
Autoclavable: Yes/No
Samples:
US$ 0/Piece 1 Piece(Min.Order)
| Request Sample
Gold Member Since 2021

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
51-0505/51-0805/51-17725/51-0515/51-0815/51-17735
Dimension
30*45, 35*45, 45*45, 25*25
Sterile
No
Unit
100/Bag, 10 Bags/Case, 50/Bag, 10 Bags/Case
Total
1000/Case, 500/Case
Transport Package
100/Bag, 10 Bags/Case, 50/Bag, 10 Bags/Case
Specification
100/Bag, 10 Bags/Case
Trademark
Biologix
Origin
Changzhou, Jiangsu
Production Capacity
1000000 Cases/Month

Product Description

Densest foam, Densest Sponge, and Degreasing Fiber, Fit for Vials and Bottles Drosophila Closures

Feature:

· Material: Densest foam, densest sponge, and degreasing fiber are available

    Densest foam:

    The material density is moderate and the deformation effect is good, easy to operate and maintain a tight fit to the tube wall after repeated use and multiple movements, high air permeability ensures the growth of drosophila

    Densest sponge:

    Dense material, can completely block the entry of mites, moderate hardness, easy to operate during the experiment, autoclavable, not easily deformed and damaged, and can be reused

    Degreasing fiber:

    Excellent shaping effect makes the internal space compact and prevents mites from entering while still ensuring breathability, cost-effective, recommended for one-time use

· Cause minimal shedding and reduce evaporation

· Maintains tight fit after repeated use and removal

 

Densest Foam, Densest Sponge, and Degreasing Fiber Drosophila Closures

Densest Foam, Densest Sponge, and Degreasing Fiber Drosophila Closures
Ordering Information
Cat # Product Material Size(mm) Unit
51-0505 Narrow Vials Closures Densest Foam 30*45 100/Bag, 10 Bags/Case
51-0805 Wide Vials Closures Densest Foam 35*45 100/Bag, 10 Bags/Case
51-17725 Bottles Closures Densest Foam 45*45 50/Bag, 10 Bags/Case
51-0515 Narrow Vials Closures Densest Sponge 25*25 100/Bag, 10 Bags/Case
51-0815 Wide Vials Closures Densest Sponge 28*30 100/Bag, 10 Bags/Case
51-17735 Bottles Closures Densest Sponge 40*30 100/Bag, 5 Bags/Case
51-0525 Narrow Vials Closures Degreasing Fiber 24*30 100/Bag, 10 Bags/Case
51-0825 Wide Vials Closures Degreasing Fiber 27*30 100/Bag, 10 Bags/Case

Densest Foam, Densest Sponge, and Degreasing Fiber Drosophila Closures1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc. 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Gold Member Since 2021

Suppliers with verified business licenses

Manufacturer/Factory
Type of Ownership
Limited Company
Management System Certification
ISO 9001, GMP