0.5ml 1.5ml 2ml Microcentrifuge Tubes Cell Centrifugation Molecular Biology Sample Storage

Product Details
Certification: CE, ISO
Material: Rubber / Plastic
Capacity: 1.5mL
Still deciding? Get samples of US$ 0/Piece
Request Sample
Manufacturer/Factory
Gold Member Since 2021

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Type of Ownership
Limited Company
Management System Certification
ISO 9001, GMP
  • 0.5ml 1.5ml 2ml Microcentrifuge Tubes Cell Centrifugation Molecular Biology Sample Storage
  • 0.5ml 1.5ml 2ml Microcentrifuge Tubes Cell Centrifugation Molecular Biology Sample Storage
  • 0.5ml 1.5ml 2ml Microcentrifuge Tubes Cell Centrifugation Molecular Biology Sample Storage
  • 0.5ml 1.5ml 2ml Microcentrifuge Tubes Cell Centrifugation Molecular Biology Sample Storage
  • 0.5ml 1.5ml 2ml Microcentrifuge Tubes Cell Centrifugation Molecular Biology Sample Storage
  • 0.5ml 1.5ml 2ml Microcentrifuge Tubes Cell Centrifugation Molecular Biology Sample Storage
Find Similar Products

Basic Info.

Model NO.
80-1500 80-0500 80-0015 80-1500 80-1501 80-1502 80
Color
Red Yellow Blue Clear
Transport Package
5000 Tubes/Case
Specification
CE, FDA, ISO
Trademark
Biologix
Origin
China
HS Code
3917220000

Product Description

Microcentrifuge Tubes

I. APPLICATIONS
1. Cell centrifugation
2. Molecular biology
3. Sample storage
4. Centrifugation of precipitates

II. FEATURES
1. Materials: Strong, medical-grade polypropylene
2. Chemically resistant to alcohols and mild organic solvents
3. Transparent wall permits easy viewing of tube contents
4. Working temperature: stable from -20ºC to 121ºC (Autoclavable)
5. Tested to withstand centrifugation of 20,000 RCF in a fully supported rotor
6. Certified RNase & DNase Free

III. TUBE DESIGN
1. Conical bottom design fits most standard floor model and table-top centrifuges
2. Molded graduations in 0.5ml increments
3. Clearly visible with either clear or turbid samples
4. Available in 4 colors: clear, red, yellow, and blue

IV. CAP DESIGN
1. Attached cap

V. PACKAGING
1. Bulk packaged, 500 tubes/pack and 10 packs/case

 
0.5ml 1.5ml 2ml Microcentrifuge Tubes Cell Centrifugation Molecular Biology Sample Storage
0.5ml 1.5ml 2ml Microcentrifuge Tubes Cell Centrifugation Molecular Biology Sample Storage
0.5ml 1.5ml 2ml Microcentrifuge Tubes Cell Centrifugation Molecular Biology Sample Storage


VI. DESCRIPTION 
 
Cat # Volume Color Sterile Unit
80-0500

0.5ml

Clear No 500 Pieces/Pack, 10 Packs/Case
80-0015 1.5ml Clear No 500 Pieces/Pack, 10 Packs/Case
80-1500 1.5ml Clear No 500 Pieces/Pack, 10 Packs/Case
80-0020 2.0ml Clear No 500 Pieces/Pack, 10 Packs/Case
80-1501* 1.5ml Red No 500 Pieces/Pack, 10 Packs/Case
80-1502* 1.5ml Yellow No 500 Pieces/Pack, 10 Packs/Case
80-1503* 1.5ml Blue No 500 Pieces/Pack, 10 Packs/Case


0.5ml 1.5ml 2ml Microcentrifuge Tubes Cell Centrifugation Molecular Biology Sample Storage

1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc. 

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier