Gamma Radiation Sterilized Plug Cap Cell Culture Flasks

• After-sales Service: 5 Years
• Warranty: 5 Years
• Disposable: Disposable
• Model NO.: 07-8/9
• Certification: CE, ISO, FDA
• Material: Polystyrene
• Capacity: 60/250/650 Ml
• Sterile: Gamma Radiation
• Character: Non-Pyrogenic, Non-Cytotoxic
• Other: Dnase & Rnase Free, Human DNA Free
• Transport Package: 5 /Bag, 40 Bags/Case 5 /Bag, 20 Bags/Case, etc
• Specification: 25 cm2, 75 cm2, or 175 cm2
• Trademark: Biologix Brand
• Origin: Changzhou, Jiangsu, China.

Product Description

Gamma radiation sterilized plug cap cell culture flasks

 

 

Features:

--Made of high quality medical grade polystyrene
--Available flask sizes include surface areas of 25 cm2 , 75 cm2 , or 175 cm2
--Plug cap and filter cap options available for all flask sizes
--Plug caps completely isolate the culture from the outside environment
--Filter caps prevent cross-contamination while meeting the requirements for gas exchange
--Short, wide, angled neck design for easy access
--Gamma radiation sterilized
--Non-pyrogenic, non-cytotoxic
--DNase & RNase free, human DNA free

Ordering Information

 

Cat #	Cap Type	Culture  Area	Working  Volume	Total  Volume	Surface  Treatment	Sterile	Unit
07-8025	Filter	25cm^2	7ml	60ml	YES	YES	5 Pieces/Pack, 40 Packs/Case
07-8075	Filter	75cm^2	25ml	250ml	YES	YES	5 Pieces/Pack, 20 Packs/Case
07-8175	Filter	175cm^2	50ml	650ml	YES	YES	5 Pieces/Pack, 8 Packs/Case
07-9025	Plug	25cm^2	7ml	60ml	YES	YES	5 Pieces/Pack, 40 Packs/Case
07-9075	Plug	75cm^2	25ml	250ml	YES	YES	5 Pieces/Pack, 20 Packs/Case
07-9175	Plug	175cm^2	50ml	650ml	YES	YES	5 Pieces/Pack, 8 Packs/Case

1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
 
2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
 
3.What are Biologix's Commitments to Quality?
At Biologix, we look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more, all in order to consistently ensure customer satisfaction. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Our facility is equipped with the latest instruments and technology from the most trusted manufacturers, ensuring that Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc.