Single Frosted End Microscope Slide
1. Features
1) The slides are with clean glass surface;
2) Ground edges prevent personal injury an chipping of glass caused by the cut edges;
3) The glass slide end faces are polished;
4) The slides without frosted are can be effectively used;
5) The slides with frosted area are convenient for classification and storage.
2. Private Label and OEM
3. Order Information
1) How to Order
Biologix prefers wire transfers, but we also accept VISA and MasterCard. You can place order by telephone, fax, email. All orders can be shipped out by sea-freight, air-freight, courier to international customers normally within 30 days.
Biologix Ordering Information:
2) Product Guarantee
Blologix guarantees 100% satisfaction or your money back! We guarantee the products to be free of defects in workmanship and material. Biologix will replace any defective products upon prompt notification and authorization.
3) Returned Products
Any return request must be authorized before credit is provided. Please provide the product, invoice number, and reason for the return. A restocking fee may apply. Products 30 days after delivery, special order/custom products are subject to review prior to issuing credit.
4) Join the Biologix Network
Now you can receive our monthly newsletter, special promotional opportunities by email, and much, much more! Visit our website and sign up to join the thousands of customers already enjoying the Biologix Benefits!
5) Free Product Samples
Let us send you a FREE sample package of our great products. Contact us today if you are interested in trying out the Biologix products before you buy.
6) Distribution
If interested in distribution opportunities, please contact us for distributor terms and pricing. We are accepting distribution opportunities worldwide.
4. Company Overview
Biologix Group Ltd is founded in USA in the year 2000 and has since been committed to the design and manufacture of high quality, low-priced scientific and biomedical supplies. Throughout its long company history, Biologix has excelled at providing top quality laboratory supplies to distributors at unbeatable prices. Time and time again, after consistently delivering on this promise and expectation, its customers have positioned Biologix among the top manufacturers of laboratory supplies in the world.
Most products manufactured in our U. S. FDA registered facilities are certified sterile, DNase and RNase Free, and non-pyrogenic using the highest quality, international famous medical-grade plastic materials. Some of the world's top branded laboratory supplies, in vitro diagnostic kits, and medical devices are also produced as OEM and / or Private Labeled products.
| Cat# |
Material |
Type |
Size |
Sterile |
Unit |
| 7101 |
Clear Glass |
Single Frosted End |
25.4x76.2mm |
No |
72 pieces/pack, 50 packs/case |
| 7105 |
Clear Glass |
Plain Slides |
25.4x76.2mm |
NO |
72 pieces/pack, 50 packs/case |
1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
2. What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
3. What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.
Audited Supplier 
){kind=link}
){kind=link}