Laboratory Large LCD Screen with Controllable White Backlight, Portable pH/Conductivity Meter

• Disposable: Disposable
• Certification: CE, ISO, FDA
• Material: Plastic
• Model NO.: 01-MP611/01-MP613
• pH Measuring Range: (-2.00~19.99)pH
• pH Resolution: 0.1/0.01 pH
• pH Accuracy: Meter: ±0.01pH; Overall: ±0.02pH
• pH Stability: ±0.01 pH/3h
• pH Temp.Compensation: (0~100)°c (Auto/Manual)
• Data Storage: 200 Sets
• Transport Package: 1/Case
• Specification: CE, FDA, ISO9001
• Trademark: BIOLOGIX
• Origin: Changzhou City, Jiangsu Province, China
• Production Capacity: 200 Cases/Week

Product Description

Large LCD Screen with Controllable White Backlight Portable pH/Conductivity Meter

Feature:

· Portable PH/Conductivity Meter

· Large LCD screen with controllable white backlight

· Built-in microprocessor chip has Intelligent functions such as auto calibration, ATC, data storage, function settings,auto diagnosis, auto power off, and undervoltage prompt, etc

· Auto recognition of 25 buffers with three kinds of options:Europe & USA, NIST and China Support 1, 2, 3 points calibration

· Adopt advanced conductivity measurement technology with conductivity electrode (K=1), it can meet measuring accuracy requirement for range of 0.5μS/cm ~ 200mS/cm

· Can switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.

· Auto recognition of 8 conductivity standard solution with 2 kinds of options: Europe & USA, and China

Ordering Information

Technical Parameter	Cat#	01-MP611	01-MP613
PH	Measuring range	(-2.00~19.99)pH
	Resolution	0.1/0.01 pH
	Accuracy	Meter: ±0.01pH; Overall: ±0.02pH
	Stability	±0.01 pH/3h
	Temp.compensation	(0~100)°C (Auto/manual)
mV	Measuring range	±1999.9mV
	Resolution	1mV
	Accuracy	±0.1% FS
Temp.	Measuring range	(0 ~ 100)ºC
	Resolution	0.1ºC
	Accuracy	5 ~ 60ºC: ±0.4ºC Others: ±0.8ºC
Cond.	Measuring range	/	Conductivity: (0.00~19.99)μS/cm (20.0~199.9)μS/cm (200~1999)S/cm (2.00~19.99)mS/cm (20.0~199.9)mS/cm TDS:(0~100)g/L Salinity:(0~100)ppt Resistivity:(0~100)MΩ·cm
	Resolution	/	0.01/0.1/1μS/cm 0.01/0.1 mS/cm
	Accuracy	/	±1.0% FS, Overall: ±1.5% FS
	Temp. compensation	/	(0~100)°C (Auto/manual)
	Electrode constant	/	0.1/1/10 cm-1
Other	Data storage	200 sets
	Power	AA batteries (1.5V x2)
	Dimensions/N.W.	(160x90x30)mm/360g
	IP grade	IP57 Dustproof and waterproof
	Standard Accessaries	pH electrode,Temperature probe, pH buffer solution (powder -like), Manual	pH electrode, Cond. electrode (K=1), Temperature probe, pH buffer solution(powder-like), Manual

* X stands for a different plug: 1-US Plug; 4-EURO Plug; 5-UK Plug

1.What are the main factors that influence the maximum centrifugal acceleration force?

Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.