Laboratory Disposable Consumable 15/50ml Flat-Top Plug-Seal Caps Sterile Centrifuge Tubes

• After-sales Service: 5 Years
• Warranty: 5 Years
• Disposable: Disposable
• Model NO.: 10-9151/10-9152/10-9501/10-9502
• Certification: CE, ISO, FDA
• Material: Rubber / Plastic
• Volume: 15/50ml
• Characteristic: Rnase & Dnase Free, Gamma Radiation
• Available: Racked Package and Bulk Package
• Autoclavable: Yes
• Rnase&Dnase Free: Yes
• Certificate: ISO:9001/13485, CE
• Transport Package: 500/Case
• Specification: 15ml/50ml
• Trademark: BIOLOGIX
• Origin: Changzhou, Jiangsu, China.
• Production Capacity: 50 Cases/Day
• Package Size: 5.00cm * 3.00cm * 10.00cm
• Package Gross Weight: 2.000kg

Product Description

Laboratory Disposable Consumable 15/50ml Flat-Top Plug-Seal Caps Sterile Centrifuge Tubes 

Feature:
• 15ml and 50ml conical tubes available
• 15ml and 50ml tubes can withstand centrifugation of 12,000G and 16,000G respectively
• Gamma radiation sterilized or non-sterile options available
• Non-pyrogenic
• Stable working temperature: -20°C to 121 °C
• DNase & RNase free, human DNA free

PACKAGING

1. Foam racked package (sterile)
a) Tubes are aligned and organized upright, ready for use
b) Samples can be viewed without removing tubes from rack
2. Bulk package (sterile or non-sterile)
a) Sterile tubes are packaged with caps attached; non-sterile tubes and caps are packaged separately
b) All tubes packaged in durable, transparent polyethylene bags

CAP DESIGN

1. Flat-top cap
a) Constructed of biologically inert and chemically resistant high density polyethylene (PE)
b) Double threaded design reduces cross-threading and eases opening and closing
c) Flat top serves as an additional writing area for sample identification
2. Plug-seal screw cap
a) Constructed of biologically inert and chemically resistant high density polypropylene (PP)
b) Double threaded design reduces cross-threading and eases opening and closing
c) Autoclavable

TUBE DESIGN

* Constructed of strong, medical-grade polypropylene
* Paired with leak-proof caps that comply with IATA Safety Standards
* Conical bottom design fits most standard floor model and table-top centrifuges
* Transparent tube walls permit easy viewing of contents
* Graduation markings in 1 ml or 5ml increments (15ml and 50ml tubes respectively)
* White writing area
* Solvent-resistant printing will not erode during routine laboratory procedures

Ordering Information

Cat #	Volume	Caps	Sterile	Package	Unit
10-9151	15	Flat Top	Yes	Rack	50/Rack, 10 Racks/Case
10-9152	15	Flat Top	Yes	Bulk	25/Pack, 20 Packs/Case
10-9501	50	Flat Top	Yes	Rack	25/Pack, 20 Packs/Case
10-9502	50	Flat Top	Yes	Bulk	25/Pack, 20 Packs/Case
10-9815	15	Flat Top	No	Bulk	500/Case
10-9850	50	Flat Top	No	Bulk	500/Case
10-0151	15	Plug Seal	Yes	Rack	50/Rack, 10 Racks/Case
10-0152	15	Plug Seal	Yes	Bulk	25/Pack, 20 Packs/Case
10-0501	50	Plug Seal	Yes	Rack	25/Pack, 20 Packs/Case
10-0502	50	Plug Seal	Yes	Bulk	25/Pack, 20 Packs/Case
10-0815	15	Plug Seal	No	Bulk	500/Case
10-0850	50	Plug Seal	No	Bulk	500/Case

 

1. What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2. What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3. What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.