Freezing Storage Box with Cryogenic Vials 2D Bottom Coded Vials Cryogenic Vials in Box
Features
--All you need in one package:
- CryoKING Vials with pre-set 2D barcodes
- Pre-assembled inside the CryoKING Boxes
- Pre-sterilized
--Certified: foreign DNA free, DNase & RNase free, endotoxin free
--Rapidly scans and identifies an entire box full of vials
--Pre-set 1D barcodes and numbers on side for immediate scanning or visual identification.
Specifications
Working temperature: stable from -196°C to 121°C
Suitable for liquid nitrogen freezing
Ordering Information
| Cat # |
Volume |
Bottom
barcode |
Side
Code |
Wells |
Thread
Type |
Dimensions
(mm) |
Unit |
| 89-905XA |
0.5ml Vials +1 inBox |
Yes |
Yes |
100-well |
External |
133x133x36 |
6 Bags/Pack,2 Packs/Case |
| 89-910XA |
1.0ml Vials +2 inBox |
Yes |
Yes |
100-well |
External |
133x133x52 |
6 Bags/Pack,2 Packs/Case |
| 89-915XA |
1.5ml Vials +2 inBox |
Yes |
Yes |
100-well |
External |
133x133x52 |
6 Bags/Pack,2 Packs/Case |
| 89-922XA |
2.0ml Vials +2 inBox |
Yes |
Yes |
100-well |
External |
136x136x52 |
6 Bags/Pack,2 Packs/Case |
| 89-923XA |
2.0ml Vials +2 inBox |
Yes |
Yes |
100-well |
Internal |
136x136x52 |
6 Bags/Pack,2 Packs/Case |
| 89-920XA |
2.0ml Vials +2 inBox |
Yes |
Yes |
81-well |
External |
133x133x52 |
6 Bags/Pack,2 Packs/Case |
| 89-921XA |
2.0ml Vials +2 inBox |
Yes |
Yes |
81-well |
Internal |
133x133x52 |
6 Bags/Pack,2 Packs/Case |
| 89-950XA |
5.0ml Vials +3.75 inBox |
Yes |
Yes |
81-well |
External |
133x133x95 |
6 Bags/Pack,2 Packs/Case |
X--Cap Color : 0-White,1-Red,2-Green,3-Blue,4-Yellow*,5-Purple,7-Clear
1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
3.What are Biologix's Commitments to Quality?
At Biologix, we look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more, all in order to consistently ensure customer satisfaction. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Our facility is equipped with the latest instruments and technology from the most trusted manufacturers, ensuring that Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc.
Audited Supplier 
){kind=link}
){kind=link}