Laboratory Disposable Hot Selling Sterile 15/50ml 9400g Centrifugation Conical Bottom Centrifuge Tubes

• Certification: CE, ISO, FDA
• Material: PP Material
• Volume: 15ml and 50ml
• Model NO.: 10-9151/10-9152/10-9501/10-9502
• Cap: Flat-Top & Plug Seal
• Sterile: Sterile and Non-Sterile Are Available
• Working Temperature: -20°c to 121°c
• Writing Area: Yes
• Package: Bulk/Rack
• Transport Package: 500 Sets/Case
• Specification: Caps: PE/PP
• Trademark: BIOLOGIX
• Origin: Changzhou City, Jiangsu Province, China
• HS Code: 3917220000
• Production Capacity: 200 Cases/Week
• Package Size: 18.00cm * 15.00cm * 11.00cm
• Package Gross Weight: 2.000kg

Product Description

Laboratory Disposable Hot Selling Sterile 15/50ml 9400G Centrifugation Conical Bottom Centrifuge Tubes

Feature:
· Biologix Centrifuge Tubes
· Available in two sizes: 50ml and 15ml
· Tube material: PP
· Flat cap material: PE
· Screw cap material: PP
· White writing area for easy sample labeling
· Double thread design makes the cap easy to open and close
· Writable on the flat cap
· Gamma sterilized, pyrogen-free, RNase-free and DNase-free
· Available in rack pack (sterile) or bulk pack (sterile and non-sterile)
· Operating temperature: stable from -20°C to 121°C (except flat cap)
· 15ml and 50ml tubes can withstand centrifugal forces of 12,000G and 16,000G respectively
· Seal tested: Meets IATA safety standards



Ordering Information

Cat #	Volume(ml)	Caps	Sterile	Working Temperature	Unit
10-9151	15	Flat Top	Yes	-20°C to 121°C	50 Sets/Rack, 10 Racks/Case
10-9152	15	Flat Top	Yes	-20°C to 121°C	25 Sets/Pack, 20 Packs/Case
10-9501	50	Flat Top	Yes	-20°C to 121°C	25 Sets/Rack, 20 Racks/Case
10-9502	50	Flat Top	Yes	-20°C to 121°C	25 Sets/Pack, 20 Packs/Case
10-9815	15	Flat Top	No	-20°C to 121°C	500 Sets/Case
10-9850	50	Flat Top	No	-20°C to 121°C	500 Sets/Case
10-0151	15	Plug Seal	Yes	-20°C to 121°C	50 Sets/Rack, 10 Racks/Case
10-0152	15	Plug Seal	Yes	-20°C to 121°C	25 Sets/Pack, 20 Packs/Case
10-0501	50	Plug Seal	Yes	-20°C to 121°C	25 Sets/Pack, 20 Packs/Case
10-0502	50	Plug Seal	Yes	-20°C to 121°C	25 Sets/Pack, 20 Packs/Case
10-0815	15	Plug Seal	No	-20°C to 121°C	500 Sets/Case
10-0850	50	Plug Seal	No	-20°C to 121°C	500 Sets/Case

 

1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.