Advanced High-Speed Refrigerated Micro Centrifuge R290 Fluorine Free Refrigerant Biologix

Product Details
Warranty: 1 Year
Application: Lab
Certification: CE, ISO, FDA
Still deciding? Get samples of US$ 3300/Piece
Request Sample
Manufacturer/Factory
Gold Member Since 2021

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Type of Ownership
Limited Company
Management System Certification
ISO 9001, GMP
Find Similar Products

Basic Info.

Model NO.
01-832X
Max Speed
15000rpm
Max. Rcf
21,380×g, Step: 10×g
Temperature Setting
-20ºC~40ºC
Run Time
30s-99 Min; Hold (Continuous Running)
Weight
30kg
Noise
≤56 dB
Transport Package
1/Case
Trademark
BIOLOGIX
Origin
Changzhou, Jiangsu, China.

Product Description

High-speed Refrigerated Micro Centrifuge
Advanced High-Speed Refrigerated Micro Centrifuge R290 Fluorine Free Refrigerant Biologix

Features:

• Centrifuge chamber door with automatic adsorption door lock design, can be closed with a single finger.

• Precooling, the compressor will automatically start cooling as long as the set temperature is lower than the ambient temperature.

• Sound indicator to prompt that the upper cover is closed to maintain the temperature inside the chamber, after centrifugation.

• Advanced R290 fluorine free refrigerant, low carbon and environmental protection.

• M aximum rotation speed can be achieved even at 4ºC.

• Up to 9 program storage capacity according to experimental needs.

• Biosafety rotor, three-layer seal for biosafety

• High-strength aluminum alloy, three layered biosafety to withstand numerous high temperature and high pressure sterilizations.

• Five rotors with 0.2mL, 0.5mL, 1.5mL, 2mL and 5mL centrifuge tubes/ PCR tubes capacity.

• A n external condensation tank prevents condensate within the centrifuge chamber.

 

     
    Ordering Information
     

    Specifications

    01-8323

    Max. Speed

    15,000rpm (200-15,000rpm) in 100rpm increments. 

    Max. RCF

     

    21,380×g, step: 10×g

    Capacity

     

    1.5/2mL×24, 0.5mL×36, PCR8×4, 5mL×12, 5mL×18.

    Temperature setting

    -20ºC~40ºC

    Run Time

     

    30s-99 min; HOLD (continuous running)

    Motor Type

     

    DC brushless motor

    Safety Performance

     

    Dual door lock, over-speed detection, 

    over-temperature detection

    with Internal diagnosis system. Single phase, 

    Power Requirements

     

     

    Single phase, 

    200-240V, 50Hz, 500W

    Dimensions(mm)

     

    332(Width) × 553(depth)× 283(height) 

    Weight

    30kg

    Acceleration and deceleration time

    25s↑25s↓

    Noise

    ≤56dB

    Other functions

    Rotation speed/RCF switchover, inching operation, running process indicator, sound alert. Acceleration/ deceleration in 9 steps, program storage capacity.

    X: 4-Eur plug 5-UK plug

    Advanced High-Speed Refrigerated Micro Centrifuge R290 Fluorine Free Refrigerant Biologix1.What are the main factors that influence the maximum centrifugal acceleration force?
    Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
    The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
    Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
    2.What are autoclaving guidelines of plastics?
    To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
    3.What are Biologix's Commitments to Quality?
    We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc. 





     

    Send your message to this supplier

    *From:
    *To:
    *Message:

    Enter between 20 to 4,000 characters.

    This is not what you are looking for? Post a Sourcing Request Now
    Contact Supplier