Low-Noise Design Palm Micro Centrifuge Rotors for Microcentrifuge Tubes, PCR Tubes, and PCR 8-Strip Tubes Included

Warranty: I Year
Application: Lab
Certification: CE, ISO, FDA
Structure: Desktop
Max Speed: <8000r/min
Brand: Biologix
Gold Member Since 2021

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
01-800X
Max. Speed
7000
Max. Rcf
2680
Driving Motor
DC Motor
Rotor Capacity 1
0.2/0.5/1.5/2.0ml*8
Rotor Capacity 2
0.2ml*16 PCR Strips
Rotor Capacity 3
0.2ml*2 PCR 8 Strips
Transport Package
1 PCS/ Pack
Specification
DC motor
Trademark
BIOLOGIX
Origin
Changzhou City, Jiangsu Province, China
HS Code
8421199090

Product Description

Microfiltration And Quick Spins Palm Micro Centrifuge
Low-Noise Design Palm Micro Centrifuge Rotors for Microcentrifuge Tubes, PCR Tubes, and PCR 8-Strip Tubes Included
Low-Noise Design Palm Micro Centrifuge Rotors for Microcentrifuge Tubes, PCR Tubes, and PCR 8-Strip Tubes Included

 
 
 
Characteristic
 

The Palm Micro Centrifuge is a very small, compact centrifuge ideal for microfiltration and quick spins. 


Features:
1.Fixed speed: 7000 rpm
2.Quick acceleration and deceleration
3.Rotors for microcentrifuge tubes, PCR tubes, and PCR 8-strip tubes included
4.Easily change rotors without tools
5.Quiet, low-noise design
 
Ordering Information:
Catalogue No.

Max. Speed[rpm]

Max. RCF[×g]

Rotor Capacity

Driving Motor

01-800X 7000 2680

0.2/0.5/1.5/2.0mL×8;

0.2mL×16 PCR strips or

0.2mL×2 PCR 8 strips

      DC motor

 

 

 

 

 

 

 

Low-Noise Design Palm Micro Centrifuge Rotors for Microcentrifuge Tubes, PCR Tubes, and PCR 8-Strip Tubes Included

 

1. What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2. What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3. What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc. 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Gold Member Since 2021

Suppliers with verified business licenses

Manufacturer/Factory
Type of Ownership
Limited Company
Management System Certification
ISO 9001, GMP