PVC PS PP Solution Basins 25ml, 55ml, and 100ml

Product Details
Disposable: Disposable
Certification: CE, ISO, FDA
Material: Rubber / Plastic
Still deciding? Get samples of US$ 0/Piece
Request Sample
Manufacturer/Factory
Gold Member Since 2021

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Type of Ownership
Limited Company
Management System Certification
ISO 9001, GMP
  • PVC PS PP Solution Basins 25ml, 55ml, and 100ml
  • PVC PS PP Solution Basins 25ml, 55ml, and 100ml
  • PVC PS PP Solution Basins 25ml, 55ml, and 100ml
  • PVC PS PP Solution Basins 25ml, 55ml, and 100ml
  • PVC PS PP Solution Basins 25ml, 55ml, and 100ml
  • PVC PS PP Solution Basins 25ml, 55ml, and 100ml
Find Similar Products

Basic Info.

Model NO.
25-1025 25-1202 25-0052 25-0051 25-1100
Name
25ml 50ml 55ml 100ml Solution Basins
Made of
PVC PS PP Reagent Reservoirs
Sterile
Sterile or Non Sterile
Color
White Clear Assorted Colors
Autoclavable
Autoclavable or Non Autoclavable
PP 12-Channel Basins Assorted Colors
Clear, Blue, Green, Pink, and Yellow
Specification
25ml 50ml 55ml 100ml Solution Basins
Trademark
Biologix
Origin
China
Production Capacity
1000000 Cases/Month

Product Description

Disposable Plastic Solution Basins 25ml 50ml 55ml 100ml Individually Packaged Gammar Sterile PVC PS PP

PVC PS PP Solution Basins 25ml, 55ml, and 100ml
PVC PS PP Solution Basins 25ml, 55ml, and 100ml
PVC PS PP Solution Basins 25ml, 55ml, and 100ml

 

 

Features:

1. Made of PVC, polystyrene (PS), or strong polypropylene (PP),PVC basins have transparent walls to permit easy viewing of contents

2. Polypropylene basins are chemically resistant to alcohols and mild organic solvents

3. PS one-channel basins are available in three sizes: 25ml, 55ml, and 100ml; 25ml and 55ml basins have a V-shaped bottom design

4. PVC one-channel basins have a capacity of 55ml and a V-shaped bottom design

5. PP 12-channel basins are double sided: the 12-channel side has a capacity of 5ml per channel; the other side (single-channel) has a capacity of 50ml

6. PP 12-channel basins are available in assorted colors: clear, blue, green, Pink, and yellow

7. PS basins are individually packaged (sterile); PVC and PP basins are bulk packaged (non-sterile)

Ordering Information

 

 
Cat # Volume Material Color Sterile Package Unit
25-1025 25ml PS White Yes Individually Wrapped 1 Piece/Pack, 100 Packs/Case
25-1202 50ml PP Assorted Colors No Bulk 25 Pieces/Pack, 4 Packs/Case
25-0052 55ml PVC Clear No Bulk 100 Pieces/Pack, 8 Packs/Case
25-0051 55ml PS White Yes Individually Wrapped 1 Piece/Pack, 100 Packs/Case
25-1100 100ml PS White Yes Individually Wrapped 1 Piece/Pack, 50 Packs/Case
 PVC PS PP Solution Basins 25ml, 55ml, and 100ml
1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc. 


 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier