Gamma Ray Pre-Sterilized Pes PP Ca Mce GF Nylon66 PVDF PTFE Extreme-Low Protein Excellent Throughput Syringe Filter

• Disposable: Disposable
• Certification: CE, ISO, ISO13485 ISO9001
• Material: Pes PP Ca Mce GF Nylon66 PVDF PTFE
• Pore Size: 0.10um 0.22um 0.45um
• Sterile: Optional
• Package: Individually Packed
• Model NO.: 08-PES1322R/08-PES2522R/08-PES3022R/08-PES3322S
• Diameter: 4mm 13mm 25mm 30mm
• Other: Hydrophilic Hydrophobic
• Trademark: BIOLOGIX
• Origin: Changzhou Jiangsu China

Product Description

Gamma Ray pre-sterilized PES PP CA MCE GF Nylon66 PVDF PTFE Extreme-low Protein Excellent Throughput Syringe Filter

Features
Single Use and Gamma Ray pre-sterilized
Sterile graded 0.22μm membrane: LRV>7 for Brevundimonas diminuta, ATCC19146.
Non-pyrogenic, low extractables and surfactant-free ensures purity of filtrate.
Extreme-low Protein Binding <1.5% (PES)
Excellent Thoughput, for faster filtration and more process volume

Applications
Sterile filtration and clarification of biological fluids
Tissue culture media preparation
Protein and enzyme filtration
Hybridization buffers
Other aqueous solutions
 

 

Ordering Information

Cat #	Description	Unit
08-PES1322R	Membrane: PES, pore size: 0.22μm, diameter:13mm. Female luer lock + male luer slip. Individually packed.	100 Pcs/Pack, 8 Packs/Case, Case of 800
08-PES2522R	Membrane: PES, pore size: 0.22μm, diameter:25mm. Female luer lock + male luer slip. Individually packed.	100 Pcs/Pack, 4 Packs/Case, Case of 400
08-PES3022R	Membrane: PES, pore size: 0.22μm, diameter:30mm. Female luer lock + male luer slip. Individually packed.	100 Pcs/Pack, 4 Packs/Case, Case of 400
08-PES3322S	Membrane: PES, pore size: 0.22μm, diameter:33mm. Double luer lock.  Individually packed.	100 Pcs/Pack, 4 Packs/ Case,  Case of 400
08-PES3345S	Membrane: PES, pore size: 0.45μm, diameter:33mm. Double luer lock. Individually packed.	100 Pcs/Pack, 4 Packs/ Case,  Case of 400
08-PES3322M	Membrane: PES, pore size: 0.22μm, diameter:33mm. Female luer lock + male luer slip. Individually packed.	100 Pcs/Pack, 4 Packs/ Case,  Case of 400
08-PES3345M	Membrane: PES, pore size: 0.45μm, diameter:33mm. Female luer lock + male luer slip. Individually packed.	100 Pcs/Pack, 4 Packs/ Case,  Case of 400
08-CA3022R	Membrane: CA, pore size: 0.22μm, diameter:30mm. Female luer lock + male luer slip. Individually packed.	100 Pcs/Pack, 4 Packs/ Case,  Case of 400
08-CA3045R	Membrane: CA, pore size: 0.45μm, diameter:30mm. Female luer lock + male luer slip. Individually packed.	100 Pcs/Pack, 4 Packs/ Case, Case of 400

For more models, please contact the sales manager.

1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.