Hanks Buffer (1×) (Without Ca2+&Mg2+) Is The Most Commonly Used Balanced Salt Solution in Biological Experiments

Product Details
After-sales Service: 5 Years
Warranty: 5 Years
Disposable: Non-Disposable
Still deciding? Get samples of $ !
Request Sample
Gold Member Since 2021

Suppliers with verified business licenses

Audited Supplier Audited Supplier

Audited by an independent third-party inspection agency

Type of Ownership
Limited Company
Management System Certification
ISO 9001, GMP
  • Hanks Buffer (1×) (Without Ca2+&Mg2+) Is The Most Commonly Used Balanced Salt Solution in Biological Experiments
  • Hanks Buffer (1×) (Without Ca2+&Mg2+) Is The Most Commonly Used Balanced Salt Solution in Biological Experiments
Find Similar Products

Basic Info.

Model NO.
HANKS-500 HANKS-1000
Certification
CE, ISO
Reactant State
Cell
Material
Buffer
Transport Package
Bottled
Specification
bottled
Trademark
BIOLOGIX

Product Description

Hanks buffer contains glucose, providing simple nutrition for cells. It can be used for prolonged digestion/separation and short-term transport/storage of cells.

Features
1. Balanced salt solutions commonly used in biological laboratories. 
2. It is one of the commonly used buffers in cell isolation or culture.
3. It has the function of maintaining osmotic pressure, keeping PH stable and providing simple nutrition.
4. After 0.1μm sterilizing filtration and endotoxin detection, it can be directly used for routine cell culture. Endotoxin ensure less than 0.5 EU / mL .
5. Without Ca2+&Mg2+.
Hanks Buffer (1×) (Without Ca2+&Mg2+) Is The Most Commonly Used Balanced Salt Solution in Biological Experiments
Hanks Buffer (1×) (Without Ca2+&Mg2+) Is The Most Commonly Used Balanced Salt Solution in Biological Experiments
Hanks Buffer (1×) (Without Ca2+&Mg2+) Is The Most Commonly Used Balanced Salt Solution in Biological Experiments
 
Cat #
Product Name
Formula
Package
HANKS-500
Hanks,balanced salt
solution(1x)
137.93 mM NaCl, 5.36 mM KCl, 4.17 mM NaHCO3, 0.441 mM KH2PO4,
0.338 mM Na2HPO4, 5.56 mM D-Glucose
[-]Calcium Chloride [-]Magnesium Chloride
500mL/ Bottle, 10 Bottles/Case
HANKS-1000
0
Hanks,balanced salt
solution(1x)
137.93 mM NaCl, 5.36 mM KCl, 4.17 mM NaHCO3, 0.441 mM KH2PO4,
0.338 mM Na2HPO4, 5.56 mM D-Glucose
[-]Calcium Chloride [-]Magnesium Chloride
1000mL/ Bottle, 6 Bottles/Case

Hanks Buffer (1×) (Without Ca2+&Mg2+) Is The Most Commonly Used Balanced Salt Solution in Biological Experiments
1. What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.  What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.  What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being FDA, ISO 9001:2015, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc. 



 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier