Cryogenic Vial Closure Color Coders

• Disposable: Non-Disposable
• Certification: CE, ISO, ISO13485 ISO9001
• Material: Rubber / Plastic
• Model NO.: 88-600X
• Color: White Red Green Blue Yellow Purple Assorted
• Use: for 2.0ml and 5.0ml Vial Caps
• Total: 3000 /Case
• Character: for Mark
• Transport Package: 100 /Bag, 30 Bags/ Case
• Trademark: BIOLOGIX
• Origin: Changzhou City, Jiangsu Province, China

Product Description

Autoclavable PP Cryogenic Vial Closure Color Coders Laboratory Medical Fit Cryogenic Vials

Characteristic

 

1. Material: Strong, medical-grade polypropylene, and can be repeatedly frozen and thawed

2. Non-sterile

3. Autoclavable to 121°C and freezable to -196°C, and can be stored in vapor phase liquid nitrogen

4. Universal screw threads, sealing ring cap

    5. Fit cryogenic vials with either internal or external screw threads for quick and convenient classification and visual identification

    6. 7 colors: white, red, yellow, blue, green, Purple and Assorted
 

Ordering Information

 

Cat#	Color	Sterile	Package
88-6000	White	No	100 /Bag, 30 Bags/Case
88-6001	Red	No	100 /Bag, 30 Bags/Case
88-6002	Green	No	100 /Bag, 30 Bags/Case
88-6003	Blue	No	100 /Bag, 30 Bags/Case
88-6004*	Yellow	No	100 /Bag, 30 Bags/Case
88-6005	Violet	No	100 /Bag, 30 Bags/Case
88-6007	Clear	No	100 /Bag, 30 Bags/Case

*Call for information

1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.