Autoclavable Traditional Cryogenic Vials with Pre-Set 1d Barcodes and Numbers 7 Different Colored
Features
Made of medical grade polypropylene; Autoclavable; and can be repeatedly frozen and thawed
5ml cryogenic vials are available with external screw threads, and 2ml cryogenic vials are available with both external screw threads and internal screw threads. External thread screw vials' caps have no o-ring, which reduces the possibility of contamination
Fit 9×9 (81-well) standard cryogenic boxes
7 different colored screw caps, tubes with black graduation printing, tubes top with white writing area, base with six corners, convenient to be operated
Gamma radiations sterili zed, RNase and DNase free, endotoxin free and foreign DNA free
Pre-set 1D barcodes and numbers on sides for immediate scanning or visual identification
6 different colored markers: red, yellow, white, blue, purple, green
Specifications
Working temperature: stable from -196°C to 121°C
Suitable for liquid nitrogen freezing
Ordering Information
| Cat # |
Volume |
Thread Type |
Bottom Barcode |
Writing Area |
Side Barcode |
Sterile |
Unit |
| 88-321X |
2ml |
Internal |
|
Yes |
NO |
Yes |
25 Sets/Bag, 40 Bags/Case |
| 88-320X |
2ml |
External |
Self-Standing |
Yes |
NO |
Yes |
25 Sets/Bag, 40 Bags/Case |
| 88-350X |
5ml |
External |
Self-Standing |
Yes |
NO |
Yes |
25 Sets/Bag, 40 Bags/Case |
| 88-621X |
2ml |
Internal |
Self-Standing |
Yes |
Yes |
Yes |
25 Sets/Bag, 40 Bags/Case |
|
88-620X |
2ml |
External |
Self-Standing |
Yes |
Yes |
Yes |
25 Sets/Bag, 40 Bags/Case |
| 88-650X |
5ml |
External |
Self-Standing |
Yes |
Yes |
Yes |
25 Sets/Bag, 40 Bags/Case |
| 88-600X |
- |
- |
- |
- |
- |
- |
100 Sets/Bag, 30 Bags/Case |
X: Cap Color 0-White, 1-Red, 2-Green, 3-Blue, 4-Yellow*, 5-Purple, 7-Clear 80-6006-Assorted Color
*Call for information
1. What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
2. What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
3. What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being FDA, ISO 9001:2015, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.
Audited Supplier 
){kind=link}
){kind=link}