10UL, 20UL, 100UL, 200UL, 1000UL Filter Tips Autoclavable Rnase/Dnase Free PP Material

• Disposable: Disposable
• Certification: CE, ISO
• Material: PP
• Model NO.: 10/20/50/100/200/1000 ul
• Color: Tips All Are Natural Clear Color
• Size: 10UL 100UL 200UL 1000UL
• Sterile: Gamma
• Filters: Filters Are Made of UHMWPE with Pore Size 0.22um.
• Transport Package: 100 Racks/Case
• Specification: CE, FDA, ISO9001
• Trademark: BIOLOGIX
• Origin: Changzhou City, Jiangsu Province, China
• Production Capacity: 200 Cases/Week

Product Description

Characteristic

 

 Tips are made of PP, filters are made of UHMWPE with pore size 0.22um. 

 Tips all are natural clear color

 10µl, 20µl, 100µl, 200µl, and 1000µl tip sizes available.
 Filters prevent cross-contamination and damage to samples, ensure accurate and precise sample.
 Sterile.
 RNase & DNase free.

Ordering Information

 

Cat. No.	Description
23-0010A	10µl, rack pack. 96 Pieces/Rack, 100 Racks/Case
23-0020A	20µl, rack pack, 96 Pieces/Rack, 100 Racks/Case
23-0100A	100µl, rack pack. 96 Pieces/Rack, 100 Racks/Case
23-0200A	200µl, rack pack, 96 Pieces/Rack, 100 Racks/Case
23-0200A1	200µl, rack pack. 96 Pieces/Rack, 50 Racks/Case
23-0200A2	200µl, extra--long , rack pack. 96 Pieces/Rack, 50 Racks/Case
23-1000A	1000µl, extra-long, rack pack, 96 Pieces/Rack, 50 Racks/Case
23-1001A	1000µl, extra-long, rack pack, low retention, 96 Pieces/Rack, 50 Racks/Case

 

 

1.What are the main factors that influence the maximum centrifugal acceleration force?

Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics?

To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.