Laboratory Supplies Consumable 15/50ml Flat-Top/Plug-Seal Cap Gamma Radiation Sterile Centrifuge Tubes

• Certification: CE, ISO, FDA
• Material: Rubber / Plastic
• Capacity: 15/50ml
• Model NO.: 10-9151/10-9152/10-9501/10-9502/10-9815/10-9850/10
• Rnase&Dnase Free: Yes
• Writing Area: Yes
• Cap: Flat/Plug Seal
• Working Temperature: -20-121ºC
• Sealing Test: Iata Standard
• Sterile: Gamma Radiation
• Package: Rack/Bulk
• Transport Package: 50/Rack, 10racks/Case
• Specification: 15ml 50ml
• Trademark: BIOLOGIX
• Origin: Changzhou City, Jiangsu Province, China
• Production Capacity: 500 Cases/Week
• Package Size: 25.00cm * 20.00cm * 18.00cm
• Package Gross Weight: 3.100kg

Product Description

Laboratory Supplies Consumable 15/50ml Flat-top/Plug-Seal Cap Sterile Centrifuge Tubes

Feature:

The General Laboratory Supplies section includes many consumables commonly used in basic laboratory and medical procedures. From centrifuge tubes and test tubes to disposable gloves and microscope slides, many of these general laboratory supplies may have applications in multiple life science fields.

· 15/50ml Sterile Centrifuge Tubes

· Tubes: made of strong, highly transparent medical grade polypropylene

· Flat top caps: made of medical grade polyethylene

· 50ml conical tubes available;

· Large white writing area for easy marking

· Double threaded design reduces cross-threading; caps are easily opened and closed

· Flat Top cap can be written on

· Gamma radiation sterilized, non-pyrogenic

· Available in racked package (sterile) or bulk package (sterile & non-sterile)

· 15ml and 50ml tubes can withstand centrifugation of 12,000G and 16,000G respectively

Ordering Information

Cat #	Material	Volume	Caps	Sterile	Autoclavable	Unit	Total
10-9151	PP	15	Flat Top	Yes	Yes	50 Sets/Rack, 10 Racks/Case	500 Pieces/Case
10-9152	PP	15	Flat Top	Yes	Yes	25 Sets/Pack, 20 Packs/Case	500 Pieces/Case
10-9501	PP	50	Flat Top	Yes	Yes	25 Sets/Rack, 20 Racks/Case	500 Pieces/Case
10-9502	PP	50	Flat Top	Yes	Yes	25 Sets/Pack, 20 Packs/Case	500 Pieces/Case
10-9815	PP	15	Flat Top	No	Yes	500 Sets/Case	500 Pieces/Case
10-9850	PP	50	Flat Top	No	Yes	500 Sets/Case	500 Pieces/Case
10-0151	PP	15	Plug Seal	Yes	Yes	50 Sets/Rack, 10 Racks/Case	500 Pieces/Case
10-0152	PP	15	Plug Seal	Yes	Yes	25 Sets/Pack, 20 Packs/Case	500 Pieces/Case
10-0501	PP	50	Plug Seal	Yes	Yes	25 Sets/Pack, 20 Packs/Case	500 Pieces/Case
10-0502	PP	50	Plug Seal	Yes	Yes	25 Sets/Pack, 20 Packs/Case	500 Pieces/Case
10-0815	PP	15	Plug Seal	No	Yes	500 Sets/Case	500 Pieces/Case
10-0850	PP	50	Plug Seal	No	Yes	500 Sets/Case	500 Pieces/Case

 

1. What are the main factors that influence the maximum centrifugal acceleration force?

Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2. What are autoclaving guidelines of plastics?

To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3. What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.