Light Mini Dry Bath LCD Display Overheating Protection Rapid Calibration Support

• Certification: CE, ISO, FDA
• USB Interface: Save The Data
• Power: 60W
• Model NO.: 01-970X 01-980X 01-990X
• Operating Temperature: +10~40c
• Other: Mini Dry Bath
• Design: LED Display
• Trademark: Biologix
• Origin: Changzhou, Jiangsu, China

Product Description

Mini Dry bath


Features

Light in weight
LCD display of both temperature and time.
Rapid calibration support
Overheating protection
Optional blocks with different capacities are available
Safe and stable
USB interface to save the data
Mini 01-970x with hot lid provided to preserve the generated heat

 

 

Ordering Information

 

Specifications	01-970X	01-980X	01-990X
Display	LCD	LCD	LCD
Temperature setting range[ºC]	0-100	0-100	25-100
Temperature range [ºC]	Room temperature-23~100	Room temperature-23~100	Room temperature+5~100
Temperature control accuracy[ºC]	±0.5	±0.5	±0.5
Temperature display accuracy[ºC]	0.1	0.1	0.1
Minimum time taken for heating(25ºC-100ºC)	≤20min	≤20min	≤20min
Minimum time for cooling (20ºC-0ºC)	≤25min	≤25min	/
Max. Heating Rate	8°C /min	8°C /min	6.5°C /min
Max. Cooling Rate	3°C /min	3°C /min	/
Time setting range	0-999min/0-999sec	0-999min/0-999sec	0-999min/0-999sec
No. of programs in memory	9(2steps for each)	9(2steps for each)	9(2steps for each)
Rapid calibration	Support	Support	Support
USB interface	Support	Support	Support
Error code reminder	Support	Support	Support
External dimension [mm]	110x162x140	110x162x140	110x162x140
Overall weight [kg]	≤1	≤1	≤1
Power supply	DC12V,100-240V, 50/60Hz	DC12V,100-240V, 50/60Hz	DC12V,100-240V, 50/60Hz
Power[w]	60	60	60
Operating temperature[ºC]	+10-40	+10-40	+10-40
Operating humidity [% RH]	≤80	≤80	≤80

X: 1-US plug 4-Eur plug 5-UK plug

1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.